Choose Language
Home Products HE series HE-630L

Chain type magazine

  • Simple modular tool operation mechanism, accurate positioning, very low failure rate.
  • The maximum tool weight is 20kg, the maximum tool length is 400mm, and the maximum tool diameter (without adjacent knives) is 240mm
  • Switching time: 4 seconds

APC table

  • The table minimum degree 1 ° (0.001 ° choose)
  • The maximum allowable load of the table is 1200KG
  • Rotary automatic exchange table, its exchanging is extremely fast

Ball screw

  • Each ball screw is pretened to achieve the minimized hot deformation and the guaranteed permanent strength.

Base

  • Base is designed with T type one-piece box structure, reinforce the internal ribs and ultra wide span of linear guideway, ensure the machine with strong stability and machining precision in heavy cutting .
  • Z axis base linear guideway span: 750MM
  • X axis base linear guideway span: 800MM

Column

  • The column has double wall structure and high rigidity, which can ensure the precision of heavy cutting.
  • The structure of intersecting rib plate and the design of super wide supporting surface make the inner part of the pillar can withstand heavy cutting at high speed.

Head Stock

  • The structure design of the cross section of the rib plate on the surface of the head stock,reduces the weight, strengthens the rigidity and bearing capacity of the machine head, then ensure the machining precision.
  • Gear box structure can be added according to customers' different requirements.

Three-axis guideway

  • X/Y/Z axis is equipped with heavy load linear roller guidewaysto improve the stability of movement.
  • The guide is designed to be perpendicular to each other, giving consideration to the cutting force and the load of gravity. Improve machining performance and maximize rigidity.

Three-axis sptical ruler

  • X/Y/Z axis is equipped with heavy load linear roller guidewaysto improve the stability of movement.


  • High-pressure backward flushing chip removal system:Two vertical motors are installed, one is used for backward flushing on two sides, and the other is used for the machine to directly cool the machined workpieces. The new backward flushing chip removal design is adopted to rapidly and thoroughly remove the chips attached to the inside of the machine. The high-pressure backward flushing chip removal system mainly carries away the machining heat generated in the chips to ensure the machining precision and the surface smoothness of the workpieces as well as the machine precision.
  • High efficiency screw rod chip removal:The strip, block and particle chips cut from the metallic and nonmetallic materials can be effectively removed, and the internal chips can be cleared in the machine.
  • Chain-type chip removal machine:The chain plate type chip removal machine can handle various cuttings, and has high conveying efficiency and wide selection range of conveying speed.
  • Heat exchanger:The heat exchanger is used in the electrical box to ensure that the heat in the electrical box is extracted rapidly to maintain the temperature in the box and stabilize the operation of control system.
  • High-efficiency oil cooler:The high-efficiency oil cooler for the spindle effectively utilizes the recycling oil to take away the heat energy generated by the spindle running from the spindle through the refrigerating unit, so the spindle keeps operating at the normal temperature, thereby improving the machining precision, and ensuring the service life of the spindle.
  • Automatic Lubricating System:The positive displacement point-to-point lubrication is used to ensure that the lubricating oil is filled into each oil inlet and uniformly distributed on the machine.
  • Tricolour light:The tricolour light is arranged at the conspicuous position of the machine. When the machine is out of order, the tricolour light gives warning to the operator.
  • Nitrogen Balance System:Z-axis uses the nitrous oxide balance system, which acts steadily and smoothly without shock;The nitrogen balance system is particularly suitable for the high-speed finish of dies to improve the capacity and the working efficiency;The high-pressure nitrogen-oxygen cylinder for nitrogen-oxygen recovery to save resources;Nitrous oxide is inert gas, which is steady and hazard-free; Even though the sudden power failure occurs without early warning, the headstock will not move down to ensure the tool life and the safety of workpieces.
  • il-water separator:The oil-water separator separates the oil from the mixture in the event of oil-water mixing, and ensures the quality of cutting fluid. The recovered oil can be reused to save the cost.
  • Work light:One explosion-proof light is reasonably arranged on the two sides of the machine to fully ensure adequate lighting and protect the eyes from strong light.
High-pressure backward flushing chip removal system

High-pressure backward flushing chip removal system

High efficiency screw rod chip removal

High efficiency screw rod chip removal

Chain-type chip removal machine

Chain-type chip removal machine

Heat exchanger

Heat exchanger

High-efficiency oil cooler

High-efficiency oil cooler

Tricolour light

Tricolour light

Nitrogen Balance System

Nitrogen Balance System

il-water separator

il-water separator

Work light

Work light

Automatic Lubricating System

Automatic Lubricating System

  • On-line measuring apparatus:360-degree infrared transmission. Level of protection: IP*8. One-way repeated accuracy: 1.0μm. In the machine detection process, 90% non-cutting time is saved, and the process control is improved, so that the non-benefit tool setting and workpiece aligning time is shortened. The workpiece scrapping caused by the aligning error is eliminated. The workpiece is accurately detected to reduce the offline detection non-cutting time after machining.
  • Laser tool setting gauge:The laser tool setting gauge can measure and detect the tool with the diameter as small as 0.003 mm at any point of the laser beam; the repeated accuracy can be ±0.1 μm in the specific environment; the level of protection is IP*8 in the rapid tool setting and breakage detection. (Continuous dive test)
  • Manual tool setting gauge:High precision density repeatable positioning accuracy 1μm, high seal protection level ip67: the ultra-long life surface is repeatedly pointed at the knife 3 million times.
  • Automatic fire extinguishing device:The new automatic fire extinguishing device realizes the automatic fire detection and the automatic fire extinguishing for the machine and has working stability, reliability and safety.
  • Automatic safety lock:The processor cannot start when the security door is not closed,it is to ensure operator safety. When the safety door is opened during processing, the processing program will stopped to protect the operator.
  • High pressure pump:All components are designed centrally, with high rated pressure, compact structure, high efficiency, easy flow adjustment, and flexible movement. Main coolant Through Fluid, suitable for deep bore drilling, adequate cooling.
  • Air conditioner cooler for electrical cabinet:The installation of air conditioner cooler can keep the temperature in the electrical cabinet constant to effectively stabilize the operation of control system.
  • Optical ruler:The X/Y/Z axis can be equipped with an optical ruler system, which can detect the thermal displacement caused by the rapid displacement of the machine,and feedback the value displacement to the controller for compensation, it is suit for the high precision parts.
On-line measuring apparatus

On-line measuring apparatus

Laser tool setting gauge

Laser tool setting gauge

Manual tool setting gauge

Manual tool setting gauge

Automatic fire extinguishing device

Automatic fire extinguishing device

Automatic safety lock

Automatic safety lock

High pressure pump

High pressure pump

Air conditioner cooler for electrical cabinet

Air conditioner cooler for electrical cabinet

Optical ruler

Optical ruler

Spindle center flush

Spindle center flush

Automatic fire extinguishing induction stick

Automatic fire extinguishing induction stick